Tutorial: Nitro Colour application on Natural Nails

Phuc Pham Nitro System Leave a Comment

Here is a step by step tutorial on how to apply Nitro colour on natural nails

  1. We’re doing overlay we’re going to want to build a foundation using natural foundation
  2. We’ll start off by putting French base and then dipping it into our natural foundation and depending on the length and strength of your client’s nails you could have two or three coats of this foundation
  3. After doing foundation and all five fingers were going to apply the activator and wait 30 seconds for it to dry
  4. Once the activator has dry we’ll use the clamps to make the nails appear slimmer
  5. Next, we want to file the nail so that it would look smooth and even for us to apply our colour
    As you can see this lady’s nails have appeared thinner due to the use of the clamps
  6. We’re going to start by putting on a thin layer of colour base before dipping it into the colour
  7. Brush up all the excess powder around and under the nail and then repeat a second coat
  8. Next, we’re going to use a layer of colour base to apply on a crystal clear
    This what act as a protective layer but keep in mind not go to close to the cuticle so that you don’t get it all over your client skin
  9. Now we’re going to further file nails to give it a smooth even surface
  10. After you buff your client’s nails apply on a layer of activator before getting them to wash their hands
  11. Ensure that the nail completely dry before applying two coats of glossy top

And that’s how you apply Nitro’s colour on natural nail

Share this page

Leave a Reply